Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
dferd3  
#1 Posted : Monday, July 23, 2012 2:45:14 PM(UTC)
Quote
dferd3

Rank: Member

Groups: Registered
Joined: 7/23/2012(UTC)
Posts: 2

Our washer is a Kirklands Signature by Whirlpool. It is not going past the fill cycle. It will not drain or spin. We think it is the agitator or the motor but are unsure. We tried turning our breaker on and off but that does not help.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
MayTech  
#2 Posted : Monday, July 23, 2012 2:55:23 PM(UTC)
Quote
MayTech

Rank: Member

Groups: Registered
Joined: 7/20/2012(UTC)
Posts: 75

Possible you have a bad lid switch.

part # AP3100003

hope this helps.
dferd3  
#3 Posted : Monday, July 23, 2012 2:59:46 PM(UTC)
Quote
dferd3

Rank: Member

Groups: Registered
Joined: 7/23/2012(UTC)
Posts: 2

Could it be something else? The lid switch is fine.
MayTech  
#4 Posted : Monday, July 23, 2012 9:25:23 PM(UTC)
Quote
MayTech

Rank: Member

Groups: Registered
Joined: 7/20/2012(UTC)
Posts: 75

So when you put it into spin does anything happen? Does it sound like the motor tries to kick on? The unit should drain if the motor runs. It's a direct drive pump. if it's not agitating or spinning but the motor is running then it would be a broken motor coupling, but it should still drain.. If the motor hums for a few seconds and then stops then it's possible you have blockage in the pump (sock/rag/etc.)

If it fills and sits and does nothing at all (no motor noise at all) then it's either the motor, the lid switch or possibly the timer or a wiring issue. I'd still say lid switch, double check it to be sure.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.