Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
hibidwns  
#1 Posted : Monday, June 25, 2012 1:44:16 PM(UTC)
hibidwns

Rank: Member

Groups: Registered
Joined: 6/25/2012(UTC)
Posts: 2

The dryer was moved to a new location. When it was plugged in and the start button pressed it made a loud end of cycle buzz but would not start. The fuses, door switch, and voltage were all checked ok, I suspect the timer being faulty, but before spending $100 + would appreciate any advice.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Tuesday, June 26, 2012 1:57:35 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Are you sure it is the buzzer or is it the motor buzzing as it tries to start?
THIS FORUM IS DEAD!!!!!!!
hibidwns  
#3 Posted : Tuesday, June 26, 2012 3:52:47 AM(UTC)
hibidwns

Rank: Member

Groups: Registered
Joined: 6/25/2012(UTC)
Posts: 2

The drum was turned by hand and the motor turned freely. The sound is from the buzzer located by the side of the timer.
denman  
#4 Posted : Tuesday, June 26, 2012 4:16:26 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
See the attachment for the tech sheet


Check that the BK/BU timer contacts are closed when trying to start it.
If not then it is the timer.

If you do not own a meter, I would suggest you purchase a one. You can get a decent digital multimeter for under $20.00. You do not need fancy though it is nice if the leads are a couple feet long.
If it saves ordering one unnecessary part it has paid for itself and you end up owning a useful tool.
Most places will not let you return electrical parts so if you order it, you own it.
A couple things to watch when measuring ohms and continuity
1. Always remove power from the machine otherwise you could blow your meter.
2. Always disconnect at least one side of any device you are checking. This eliminates the possibility of measuring an alternate/parallel circuit path.
3. When checking for closed contacts and continuity use the lowest scale (Usually 200 ohms). Then try higher scales. This scale is 0 to 200 ohms so if the device you are measuring is 300 ohms this scale would show an open circuit which it is not, you are just measuring outside the scale's dynamic range.
4. When you start always short the meter leads together. This will tell you that the meter is working and if there is any 0 offset.

There is a good STICKY at the start of this forum about it's use.
File Attachment(s):
LER5636.pdf (240kb) downloaded 3 time(s).
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (2)
Similar Topics
electric dryer does not start (Microwave Repair)
by RayU 12/12/2013 7:03:52 PM(UTC)
Dryer does not start (Dryer Repair)
by Kalalau 9/20/2012 12:20:37 PM(UTC)
Dryer does not start (Dryer Repair)
by Bharat 1/7/2012 4:02:37 PM(UTC)
Dryer does not start, can hear motor attempting to (Dryer Repair)
by bog 11/5/2011 9:52:03 AM(UTC)
Dryer does not start (Dryer Repair)
by Raymond S 8/4/2011 8:35:52 AM(UTC)
Dryer does not start (Dryer Repair)
by cpboudreaux 2/15/2011 8:59:37 AM(UTC)
Dryer does not start - Amana Gas (Dryer Repair)
by timjgtr 1/8/2011 10:10:33 AM(UTC)
Dryer does not start at all (Dryer Repair)
by timjgtr 12/26/2010 2:40:08 PM(UTC)
Gae Dryer Does Not Start (Dryer Repair)
by B Wall 9/10/2010 7:03:40 AM(UTC)
Dryer does not start (Dryer Repair)
by D_Druz 3/1/2010 4:41:38 PM(UTC)
Dryer does not start, makes no sound (Dryer Repair)
by Pennell 11/12/2009 5:17:16 PM(UTC)
dryer does not start (Dryer Repair)
by petecardenas 10/19/2009 8:17:02 AM(UTC)
dryer does not start (Dryer Repair)
by petecardenas 10/19/2009 8:15:29 AM(UTC)
dryer does not start (Dryer Repair)
by bellaboo 10/1/2009 1:16:49 PM(UTC)
Amana dryer does not start (Dryer Repair)
by Barjensen 8/5/2009 4:21:07 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.