Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Rogeromholt  
#1 Posted : Sunday, June 24, 2012 12:53:28 PM(UTC)
Rogeromholt

Rank: Member

Groups: Registered
Joined: 6/24/2012(UTC)
Posts: 2

No power to unit. Breaker and out let are Ok. Could it be fuse in the filter panel Board or is it something else? Replaced filter panel board. Power goes off when you open the door
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Monday, June 25, 2012 12:30:27 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You have to check for continuity the fuse which is located in the line filter and the cavity thermostat (#1121 at the diagram) which is located on the top right side of the microwave.

GE does not sell the fuse separate. It comes as a part of the line filter, but you probably can buy it at any hardware store. If this fuse is blown, you have to check the door switches.

- The line filter Part number: WB27X10741
Part number: WB27X10741



- The universal micro switch, substitutes interlock switch as well as monitor switch Part number: WB24X10103
Rogeromholt  
#3 Posted : Sunday, September 9, 2012 2:18:17 PM(UTC)
Rogeromholt

Rank: Member

Groups: Registered
Joined: 6/24/2012(UTC)
Posts: 2

Originally Posted by: Rogeromholt Go to Quoted Post
No power to unit. Breaker and out let are Ok. Could it be fuse in the filter panel Board or is it something else? Replaced filter panel board. Power goes off when you open the door



Gene,
Replaced all parts you recommended. Unit now has power. Clock works. Clear works. None of the minute buttons work when pushed . Time cook works for time input but when pushing start nothing happens. This is getting frustrating.
Regards,
Roger
Gene  
#4 Posted : Monday, September 10, 2012 2:07:56 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Roger,

Open the control panel and make sure the membrane switch ribbon cable is plugged into the control board properly. If there is nothing wrong, replace the control panel.

- The control panel Part number: WB27X10951
Part number: WB27X10951

Gene.
Users browsing this topic
Guest (3)
Similar Topics
GE monogram Microwave oven (Microwave Repair)
by ntzhang 4/17/2012 1:56:59 PM(UTC)
Need help! - GE Monogram Microwave not heating and buzzes!! (Microwave Repair)
by JeffGinGA 3/30/2011 12:20:23 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.