Rank: Member
Groups: Registered
Joined: 5/27/2012(UTC) Posts: 10
|
was working but shut down like motor was overheating- would resume after 30 minutes (about)- now just hums- won't agitate or spin but will fill- thought motor was shot - pump turns freely and when belt is on turns freely in agitate and spin direction- could it be capacitor? thanks dkay
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
This really sounds like a bad motor. These motors have overheating protection, so it sounds like it overheated then cooled down which is why you were able to get it going after 30 minutes. if everything turns and there is nothing stuck in the pump the motor is most likely the culprit.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close