Kenmore Washer Stuck in Mid-cycle, fails to fill with rinse water - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kenmore Washer Stuck in Mid-cycle, fails to fill with rinse water Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 110 91554210	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

hydertext		#1 Posted : Thursday, May 17, 2012 3:59:57 PM(UTC)
Rank: Member Groups: Registered Joined: 5/17/2012(UTC) Posts: 2		Hi, the problem just started. The washer was working fine but now it stops in the middle of the wash cycle with a slight clicking sound. When manually advanced to the rinse cycle, it fails to drain and fill with fresh water. Thanks for your help.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Monday, May 21, 2012 4:36:21 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		I would start by replacing the timer. That is the most likely source of the problem.


User Profile View All Posts by User View Thanks

hydertext		#3 Posted : Thursday, May 24, 2012 7:21:45 PM(UTC)
Rank: Member Groups: Registered Joined: 5/17/2012(UTC) Posts: 2		Thanks sidfink43. I found out that the washing machine is getting un-stuck when I open up the lid and close it back again. it then runs through the full cycle (after being stuck for several hours). Do you think this might possibly indicate a problem with the lid switch?


User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Friday, May 25, 2012 12:11:34 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		It is easy enough to check. Use a jumper wire to bypass the lid switch and see if that fixes things. If it does replace the lid switch as it is a safety item and must be in good working condition.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close