Rank: Member
Groups: Registered
Joined: 5/4/2012(UTC) Posts: 5
|
I have a Maytag Dishwasher, purchased in December '09, and has worked fine. However, yesterday I tried to use it, and it won't start. It seems to latch OK. The "Light" cycle light will light up when pushed, and the "Sanitize" light will blink when pushed, but no other buttons show any activity. Model # MDBH979AWW3 Serial # FY4703035 Type 577-0 Got any ideas? Thanks, JD
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/4/2012(UTC) Posts: 5
|
Originally Posted by: Gene Hi Gene, Thanks a bunch for the reply. I've been gone for awhile, but now it's time to fix this dishwasher. I've got a white maytag. I'd like to start by replacing the control panel. Can you point me in the right direction for info on parts and procedure for replacement, please? Thanks, JD
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Hi JD, The white control panel Part number: W10254847
In order to remove it you have to remove the inner door panel first by removing the Torx screws along the sides and top of the inner door panel. Remove the PC board housing cover and disconnect the membrane switch from the PC board. Remove the PC board. Lift out the latch assembly. Remove the 4 screws securing the control panel to the outer door. Gene.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/4/2012(UTC) Posts: 5
|
Originally Posted by: Gene Hi JD, The white control panel Part number: W10254847
In order to remove it you have to remove the inner door panel first by removing the Torx screws along the sides and top of the inner door panel. Remove the PC board housing cover and disconnect the membrane switch from the PC board. Remove the PC board. Lift out the latch assembly. Remove the 4 screws securing the control panel to the outer door. Gene. Hey Gene, Thanks! I appreciate the info! JD
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
You are welcome. Keep us posted.
Gene.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close