Jenn Air oven door will not close - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Jenn Air oven door will not close Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: JMW9530DAS	Brand: Jenn-Air	Age: 1 - 5 years
Previous Topic Next Topic

embdenb		#1 Posted : Thursday, September 3, 2009 10:48:19 AM(UTC)
Rank: Member Groups: Registered Joined: 9/3/2009(UTC) Posts: 4		I know this subject has been discussed before, however is there a solution for an oven, approx two years old where the hinges have been replaced twice and the door has never stayed closed?:mad: I am about to purchase my third set of hinges and the plan is to somehow make the springs stronger before putting them in. Can anyone offer an alternative to fix this problem? Thanks


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Thursday, September 3, 2009 2:42:19 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You can find an explanation, cause and solution on this problem in the Maytag Technical bulletin. If you need the correct part number for the kit then post the serial number of the oven. Here are the breakdown diagrams and Replacement parts for JENN-AIR JMW9530DAS \| AppliancePartsPros.com Gene.


User Profile View All Posts by User View Thanks

embdenb		#3 Posted : Thursday, September 3, 2009 3:28:07 PM(UTC)
Rank: Member Groups: Registered Joined: 9/3/2009(UTC) Posts: 4		Thanks for the reply. I would like the correct part number for the repair kit. The serial number is 20877861GX.


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Thursday, September 3, 2009 5:30:06 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You need two hinges Part number: AP4101029 and two hinge receptacles Part number: AP4100063 If you just replaced the hinges with the above part number then you probably need just the receptacles. Gene.


User Profile View All Posts by User View Thanks

embdenb		#5 Posted : Friday, September 4, 2009 4:52:29 AM(UTC)
Rank: Member Groups: Registered Joined: 9/3/2009(UTC) Posts: 4		Thanks Gene. Will purchase the hinge and receptacles. I guess I have to pull the oven out to replace the receptacles


User Profile View All Posts by User View Thanks

britinva		#6 Posted : Saturday, February 18, 2017 8:06:17 AM(UTC)
Rank: Member Groups: Registered Joined: 4/3/2012(UTC) Posts: 32		I'm having issues with door not making tight seal.....found this old thread but the link to the Maytag Technical Bulletind is no longer valid. Does anyone still have or know how to get correct part no for the hinges for Model: JMW9530DAS Serial: 22537114JL Thanks, Mark


User Profile View All Posts by User View Thanks

Gene		#7 Posted : Saturday, February 18, 2017 5:07:36 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Hello, Mark. Sorry for the broken link. I fixed it. You would need two hinges Part number: AP6011189 and two receptacles Part number: AP6011249 Good luck. Gene.


User Profile View All Posts by User View Thanks

britinva		#8 Posted : Saturday, February 18, 2017 6:24:31 PM(UTC)
Rank: Member Groups: Registered Joined: 4/3/2012(UTC) Posts: 32		Thanks Gene


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close