Rank: Member
Groups: Registered
Joined: 3/18/2012(UTC) Posts: 1
|
How much of the machine do I have to dismantal to get the belt over the drum.Need dyagram
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/12/2012(UTC) Posts: 31
|
You must first remove the top. Then remove the splash plate and the controls. They have quick connects. Remove the rear hatch. Get the front panel off and remove the drum. Clear out the lint and check the glides and the rear bearing. It seems tough but it is not that difficult.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Hi John, You can use the instructions from the file attached to the reply. You have to read the first three pages only. If the belt broke, just replace it. If the belt fell off, inspect the idler pulley. - The belt Part number: AP4565702
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close