Gas dryer not heating up at all, just tumbles. - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Gas dryer not heating up at all, just tumbles. Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LG7801XSW1	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

itzmrmo		#1 Posted : Wednesday, July 29, 2009 7:40:45 PM(UTC)
Rank: Member Groups: Registered Joined: 7/27/2009(UTC) Posts: 2		The every first symptom was it takes much longer to dry a normal load. Now it just tumbles and no heat at all. I checked the continuity of the thermal fuse and it's good. Checked the adjustable cycling thermostat and that's good. Checked the normal thermostat and it show "open". Also checked the heat sensor that attached to the back of what looks like a heat chute. That checked out fine. I'd also replaced the main and secondary coils thinking that was the cause. Did I miss anything else to check or do you think the normal thermostat is the main culprit. TIA, Richard


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

itzmrmo		#2 Posted : Sunday, August 2, 2009 10:29:22 AM(UTC)
Rank: Member Groups: Registered Joined: 7/27/2009(UTC) Posts: 2		bump to the top someone help if you can please


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close