Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Hershel Butler  
#1 Posted : Monday, February 20, 2012 2:13:18 PM(UTC)
Hershel Butler

Rank: Member

Groups: Registered
Joined: 2/19/2012(UTC)
Posts: 2

Washer will ni go into final spin. Ran the diagnosis and got a E43 code. The door lock wax motor looked burned and showed 500 ohms so replaced it. Still getting a E43 code any ideas before I replace the control board?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Tuesday, February 21, 2012 5:21:16 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

I am not getting your model number to come up, but assuming this is a front load Frigidaire I would start by replacing the motor/speed control board. That is more like a source of a spin problem than the main control unit.
Hershel Butler  
#3 Posted : Thursday, February 23, 2012 3:59:51 PM(UTC)
Hershel Butler

Rank: Member

Groups: Registered
Joined: 2/19/2012(UTC)
Posts: 2

The model is LTF2940ES3 I replaced the main control board with the same code E43 I am not finding a motor control board and ready to take a hammer to the thing
sidfink43  
#4 Posted : Thursday, February 23, 2012 4:42:44 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Okay, here is the part

Part number: AP3891780
Part number: AP3891780


but first check the drain pump and hoses for any obstruction and the door lock and wiring for any problem. The tech notes inside the lower service panel will show you how to do some testing.
Users browsing this topic
Guest (8)
Similar Topics
Frigidaire Washer Wont spin high speed (Washer Repair)
by jchi2210 12/17/2014 12:01:09 PM(UTC)
Frigidaire washer wont spin (Washer Repair)
by MsNana2U 11/7/2009 10:13:15 AM(UTC)
Frigidaire washer wont spin! (Washer Repair)
by Jim McFarland 4/18/2008 2:04:38 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.