Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Patricia M  
#1 Posted : Tuesday, July 21, 2009 4:22:10 PM(UTC)
Patricia M

Rank: Member

Groups: Registered
Joined: 7/21/2009(UTC)
Posts: 1

Just ordered part no. wr51x10101 (defrost heater) from you. I know that the double element replaced the single element, but I am not sure it will fit. It is larger than the one I am replacing. Is there some advice you can give me. Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
applianceman  
#2 Posted : Tuesday, July 21, 2009 7:08:20 PM(UTC)
applianceman

Rank: Member

Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648

I promise you that it will fit the only problem you may have is getting it past the shelf supports at the bottom. I will go you just may have to twist and turn it a little. I recommend plugging in the wires first because it will be hard to do afterward. Read the directions you may have to use the wire extender provided with the heater. Refrigerator repair guide
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.