DW won't drain / fill - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

DW won't drain / fill Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 587.14132102	Brand: Kenmore	Age: 1 - 5 years
Previous Topic Next Topic

deertick		#1 Posted : Wednesday, January 2, 2008 4:02:21 PM(UTC)
Rank: Member Groups: Registered Joined: 1/2/2008(UTC) Posts: 1		Runs thru cycle "normal" except does not fill or drain (just uses water left in tub). Float free of obstructions and switch is heard while manually actuating. Hoses are clear. Motor / pump does not turn on to fill/drain, but does "wash". HELP!!!!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Wednesday, January 2, 2008 5:09:01 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Assuming the water valve under the sink is open, I would start with the water inlet valve. If water is coming to the dishwasher, check for 120V coming to the water inlet valve when the timer calls for water. If there is 120V, then replace the water inlet valve. If there is no 120V, then check wires. If there is nothing wrong - replace the timer. - The part number for the water inlet valve is AP3790911 - The part number for the timer is AP3214619 Good luck. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close