Customer Support 7 days a week

Welcome Guest! You can not login or register.



Go to last post Go to first unread
#1 Posted : Wednesday, January 18, 2012 11:45:18 AM(UTC)

Rank: Member

Groups: Registered
Joined: 1/18/2012(UTC)
Posts: 1

Hello all, My washer started with the DL code, so I replaced the door lock mechanism, which then it worked for 3-4 wash cycles, now it is displaying the F 11 code, I find that there is an intermittant connection at the PC board located on top and rear of unit, if I wiggle connector or hold connector tight to board, unit will work. If I let go, unit stops working and code flashes.My question is, do you think replacing the board will fix this? My next attempt will be to try and clean contacts, if possible. I am hesitant to just buy board as it is $240.00. Thanks for any help on this.
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
#2 Posted : Friday, January 20, 2012 4:55:22 PM(UTC)

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

That almost certainly sounds like the problem is with the board.

The good news, if you buy from this site and the part does not fix the problem you can return it. As long as the problem is not at the connector end I am thinking a new board will solve your problem.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.