Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
tmenter1  
#1 Posted : Tuesday, January 1, 2008 7:20:30 AM(UTC)
tmenter1

Rank: Member

Groups: Registered
Joined: 12/31/2007(UTC)
Posts: 1

i just replace the motor & pump i turn it on the water fill up
then wait for the motor to on then heard a click waited to see it start
nothing then i push cancel/ drain then motor started ran for 10 second
then stop
i replace because the other one was leaking & the motor burnt out it started to smoke
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Tuesday, January 1, 2008 11:56:24 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
You may have jammed something in the pump, just take apart and check. If ok, you may need to check your winding current per the schematic, could be a start relay/timer problem.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.