Rank: Member
Groups: Registered
Joined: 12/27/2007(UTC)
Posts: 1
|
Washed 3 loads then washer stopped dead , after 10 hours of rest it began to work fine...still working, have only done 2 loads consequetively since. What is going wrong. Dont want to wait for it to completely die before fixing or knowing what to fix.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 11/7/2007(UTC)
Posts: 622
|
there is not enough info yet, keep using till more definite signs
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
Bad idea! Measure the motor current with an amprobe before you burn out the motor! Should be around 8-9 amps. Above that and the motor will overheat. Motor overheating verified if it will not re-start after turning off. You can pull the outer cabinet off and check if motor is very hot.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
