Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
dh12  
#1 Posted : Saturday, December 17, 2011 6:19:59 PM(UTC)
dh12

Rank: Member

Groups: Registered
Joined: 12/17/2011(UTC)
Posts: 2

kenmore washer gives f2 code replaced pump and cleaned drain lines still get f2 code
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ApplianceJunk  
#2 Posted : Saturday, December 17, 2011 6:31:20 PM(UTC)
ApplianceJunk

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277

You probably know all this already, but we have to start someplace. ;)

F2=Long Drain

If the drain time exceeds 8 minutes, the water valves are turned off and F02 is flashed.

Press PAUSE/CANCEL twice to clear the display.

NOTE: After 4 minutes the “Sud” error will be displayed, then 4 minutes later the F02 error code will be displayed.

Potential Causes

• Check the drain hose and make sure it is not plugged or kinked
• Check the electrical connections at the pump and make sure the pump is running.
• Check the drain pump filter for foreign objects
• If the above does not correct the problem replace the pump

Does it seem to get all the water pumped out in time or does it pump out slow?
ApplianceJunk  
#3 Posted : Saturday, December 17, 2011 6:32:07 PM(UTC)
ApplianceJunk

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277

I was also thinking this was a duet, but see you did not post a model number.

What is the model number?
dh12  
#4 Posted : Saturday, December 17, 2011 7:18:29 PM(UTC)
dh12

Rank: Member

Groups: Registered
Joined: 12/17/2011(UTC)
Posts: 2

already replaced pump water does seam to drain well but pump continues to run then f2 appears model number 11045872403
Users browsing this topic
Guest (2)
Similar Topics
problems with washer (Washer Repair)
by zerimar242 10/23/2011 8:27:31 AM(UTC)
Problems with washer (Washer Repair)
by goodangel200 3/20/2008 7:01:13 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.