Magic Chef Dishwasher/Door Springs - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Magic Chef Dishwasher/Door Springs Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: DU96CK-01	Brand: Magic Chef	Age: More than 10 years
Previous Topic Next Topic

eappel		#1 Posted : Saturday, June 27, 2009 6:57:49 AM(UTC)
Rank: Member Groups: Registered Joined: 5/6/2009(UTC) Posts: 4		One of the Door Cables broke and the door just flops down now. I removed the lower panel and looked inside. One of the Springs (part# 44) was still hooked onto the broken, flat end of the Cable (Part #8) but neither Spring was attached to anything else. When the one Cable broke did it release the other Spring and Cable off the side of the door? My question is: If I order a new set of cables does one end of the Cable attach to both Springs and then does it loop around the white plastic roller before attaching to the lower end of the door? Or does it just go around the white plastic roller? Do I repete the same for the other end of the Springs? Or are the Springs attached independently of eachother to the Frame somewhere? Should I replace the Springs as well at this time? ezraappel@gmail.com


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

eappel		#2 Posted : Wednesday, July 1, 2009 11:58:23 AM(UTC)
Rank: Member Groups: Registered Joined: 5/6/2009(UTC) Posts: 4		:confused: Originally Posted by: eappel One of the Door Cables broke and the door just flops down now. I removed the lower panel and looked inside. One of the Springs (part# 44) was still hooked onto the broken, flat end of the Cable (Part #8) but neither Spring was attached to anything else. When the one Cable broke did it release the other Spring and Cable off the side of the door? My question is: If I order a new set of cables does one end of the Cable attach to both Springs and then does it loop around the white plastic roller before attaching to the lower end of the door? Or does it just go around the white plastic roller? Do I repete the same for the other end of the Springs? Or are the Springs attached independently of eachother to the Frame somewhere? Should I replace the Springs as well at this time?


User Profile View All Posts by User View Thanks

Gene		#3 Posted : Wednesday, July 1, 2009 7:06:05 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Looking at the diagram you can see the cable (#8) connected to both springs (#44) and the other end of the cable goes around the roller. This end of the cable then should be connected to the door hinge (plugs into the round slot). If the springs are not broken then you do not have to replace them. Here are the breakdown diagrams and Replacement parts for MAGIC CHEF DU96CK-01 \| AppliancePartsPros.com Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close