Rank: Advanced Member
Groups: Senior Expert
Joined: 11/7/2007(UTC)
Posts: 622
|
whirlpool duet F/L washer only 3 months old . only used 1 time , new home owner, did not move in till 3 months later , but machine was tested upon delivery, then they moved in a it acted up 1st time , water comes in, door locks , then unlocks , then locks,starts to count down , then a feww monutes later shows f28 and thats it , i did a diagnostic test, showed F28, check connection to mcu +ccu all looks good / pump connections look good. pump is clean, pressure switch is good +hose is clear. any ideas , this has the new style ccu at right front at top, any ideas / thanks
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277
|
Hi,
Being less then a year old it's under warranty and you should not have to mess with it. Call Whirlpool and get it fixed under warranty.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277
|
My bad, looks like you are the tech trying to repair it.
Did you unplug all the connection and plug them back in again?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 11/7/2007(UTC)
Posts: 622
|
yes i unplugged +replugged the connections
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
