Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
switched leads on inlet valve....now what?
Options
Go to last post Go to first unread
Model: ED22EWXTN01 Brand: Whirlpool Age: More than 10 years
Previous Topic Next Topic
pancit1  
#1 Posted : Tuesday, June 16, 2009 7:28:08 AM(UTC)
pancit1

Rank: Member

Groups: Registered
Joined: 6/13/2009(UTC)
Posts: 3
water in door dispenser is ok.i am not getting any water to the fill tube for the ice maker.i have manually filled tray and it dispensed ice ok but no refill.I was assured by honest people that it was working prior to us buying it.i want to troubleshoot but i dont want to get too involved.Not real comfortable with checking voltage and electrical lines.what are the most common simple fixes.in a prior post i was instructed to change leads on inlet valve and push water lever.i did get water to the ice maker when i did this......now what?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
applianceman  
#2 Posted : Tuesday, June 16, 2009 4:25:18 PM(UTC)
applianceman

Rank: Member

Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648
That tells you that the water valve is good. Assuming the wire connections are good, (it is not common for them to be bad) replace the icemaker. The icemaker might be able to be fixed and if you are interested in troubleshooting your icemaker use this link Whirlpool Icemaker Repair Guide
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET