Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
DaleHurd  
#1 Posted : Monday, December 17, 2007 12:18:48 PM(UTC)
DaleHurd

Rank: Member

Groups: Registered
Joined: 12/17/2007(UTC)
Posts: 19

Hello,

I have a SHU4306 Bosch dishwasher. I have fixed (resoldered) the Heater relay on this DW already. I have a new issue. When I push the On/off button the DW doesn't always start. The light will blink on briefly then shut off. If I do this a few time the machine will then start. I suspect a faulty on/off switch or wiring connection. It seems to intermittent to be a control board issue. Are there any other switches I should be checking?

Thanks
Dale
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
kawfeeman  
#2 Posted : Tuesday, December 18, 2007 5:24:11 AM(UTC)
kawfeeman

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/13/2007(UTC)
Posts: 323

check to see if the "hole" where the actual on/ off switch button goes back and forth is dirty.. try pressing the button in all the way slowly ... you may want to try spraying contact cleaner around the button, but it does sound like switch is bad ..
DaleHurd  
#3 Posted : Tuesday, December 18, 2007 8:29:38 AM(UTC)
DaleHurd

Rank: Member

Groups: Registered
Joined: 12/17/2007(UTC)
Posts: 19

Ok took your advice...will keep you posted
kawfeeman  
#4 Posted : Wednesday, December 19, 2007 6:22:42 AM(UTC)
kawfeeman

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/13/2007(UTC)
Posts: 323

great... good luck..
Merry and Happy !!
DaleHurd  
#5 Posted : Thursday, December 20, 2007 8:39:07 PM(UTC)
DaleHurd

Rank: Member

Groups: Registered
Joined: 12/17/2007(UTC)
Posts: 19

well,bummer...problem doesn't seem to be in the switch...I replaced the switch and I still have the problem. Would you guess the darn control unit....Ijust seems to act like a bad connection of some sorts
kawfeeman  
#6 Posted : Friday, December 21, 2007 4:12:03 AM(UTC)
kawfeeman

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/13/2007(UTC)
Posts: 323

how are the two / three wires coming into the d/w ? the black and white wires ( and ground ) .. are the wire nuts tight enough ? is there any oxidation or corrosion on those wires ?
DaleHurd  
#7 Posted : Monday, January 14, 2008 2:24:33 PM(UTC)
DaleHurd

Rank: Member

Groups: Registered
Joined: 12/17/2007(UTC)
Posts: 19

Well at long last I've gotten to the bottom of it!!!! I resoldered one of the components on the control board! Viola! It works like a charm. FYI it was a rectangular white box maybe 1/2 the size of a sugar cube. 2 contacts were loose.

As an fyi. This is the 2nd control unit repair I've made. I had to resolder the heater relay about a year ago (Fixed the never ending rinse cycle problem)
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.