GE Nautilus Dishwasher: Trouble starting - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

GE Nautilus Dishwasher: Trouble starting Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GSD3230S01WW	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

jmrec100		#1 Posted : Monday, May 25, 2009 10:19:14 AM(UTC)
Rank: Member Groups: Registered Joined: 1/26/2009(UTC) Posts: 50		When the dishwasher starts, it sounds like the motor is trying to start. My first instinct is maybe a capacitor is bad? When I play with the cycle control, turning it past the cycle and to start again, it will start after a few tries around the dial. Anything else I should be looking for? The problem just started. GE Dishwasher, Nautilus, Model no: GSD3230S01WW SN: TA832828B Thanks


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Monday, May 25, 2009 12:55:36 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are the parts for a Z01WW, could not find any info on a S01WW Replacement parts for GE GSD3230Z01WW \| AppliancePartsPros.com Since fiddling with the dial gets the unit going I would think that it is the timer causing the problem. Probably dirty contacts.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

jmrec100		#3 Posted : Sunday, September 13, 2009 11:40:48 AM(UTC)
Rank: Member Groups: Registered Joined: 1/26/2009(UTC) Posts: 50		Can I remove the panel and clean it with contact cleaner?


User Profile View All Posts by User View Thanks

denman		#4 Posted : Sunday, September 13, 2009 2:08:42 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		You could try but odds of success are low due to the grease usually used on the cams. Also hard to get the solvent to evaporate quickly so you have to leave it dry for a couple hours.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close