Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Bri_repair_question  
#1 Posted : Friday, May 22, 2009 4:22:54 PM(UTC)
Bri_repair_question

Rank: Member

Groups: Registered
Joined: 5/22/2009(UTC)
Posts: 1

Does anyone know how to take the ice dispenser front panel off to replace the ice chute door?

This in for a Whirlpool Model ED5JHEXTS00

Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
woodchuckie  
#2 Posted : Saturday, May 23, 2009 3:15:35 AM(UTC)
woodchuckie

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/10/2009(UTC)
Posts: 1,363

Remove the dispenser cover by gently prying going round and round a little at a time to prevent from breaking it. When it's off the screws will be exposed to access the other components.
tdma  
#3 Posted : Saturday, May 23, 2009 10:50:16 AM(UTC)
tdma

Rank: Member

Groups: Registered
Joined: 5/4/2009(UTC)
Posts: 29

There should be 2 small slots in the botton for a flat blade screwdriver to fit. The trick is to not insert the screwdriver too far or it will get behind the bracket that is screwed to the door.

Just insert slightly and twist, the bottom will pop out then lift the cover up to unhook the top.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.