Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
c4cdlm  
#1 Posted : Monday, December 10, 2007 1:56:08 PM(UTC)
c4cdlm

Rank: Member

Groups: Registered
Joined: 11/27/2007(UTC)
Posts: 6

Our washer would not fill with water on the rinse cycle, we called Sears, they wanted $300 to change timer, he told us to order a timer and fix it ourselves. We did and that didn't fix the problem, and several days later the machine won't agitate, it makes a loud clunking noise. What should be try next??
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Monday, December 10, 2007 6:12:26 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Regarding the water fill problem during the rinse I would recommend to check the water inlet valve. Check the coil responsible for the cold water for continuity.

Replace the water inlet valve if the coil is open.

Check for 120V coming to this coil when the timer calls for the rinse.
If there is no 120V then check the water temperature switch.

A loud clunking noise instead of the agitation most likely means a bad transmission (aka gear case).

- The part number for the water inlet valve AP3096174

- The part number for the water temperature switch AP3125989

- The part number for the transmission AP3096209

Gene.
c4cdlm  
#3 Posted : Wednesday, December 12, 2007 2:51:38 PM(UTC)
c4cdlm

Rank: Member

Groups: Registered
Joined: 11/27/2007(UTC)
Posts: 6

we put the old timer back on , and now the machine will agitate, still won't fill on the rinse cycle.
Gene  
#4 Posted : Wednesday, December 12, 2007 2:56:20 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: Gene Go to Quoted Post
Regarding the water fill problem during the rinse I would recommend to check the water inlet valve. Check the coil responsible for the cold water for continuity.

Replace the water inlet valve if the coil is open.

Check for 120V coming to this coil when the timer calls for the rinse.
If there is no 120V then check the water temperature switch.

- The part number for the water inlet valve AP3096174

- The part number for the water temperature switch AP3125989


Gene.


Did you do it?

Gene.
Users browsing this topic
Guest (3)
Similar Topics
kitchen Aid no water on rinse cycle (Dishwasher Repair)
by denniskorabiak 11/14/2012 12:36:43 PM(UTC)
kenmore washer fills for wash,but no water on rinse cycle (Washer Repair)
by doitmyself2011 4/11/2011 12:33:47 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.