Rank: Member
Groups: Registered
Joined: 5/13/2009(UTC) Posts: 4
|
The control panel does not allow me to select Normal Wash or Light wash both racks. Both of which would save me money on electric and water usage. What is the most likely cause and least expensive repair option.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 12/2/2007(UTC) Posts: 769
|
The likely cause would be a failed user interface ( AP3560813), but the least expensive repair would be to get into the control board and clean the ends of the ribbon cable from the interface with a pencil eraser, and make sure it is mounted securely to the board. If that doesn't do it, then it's back to a failed user interface.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close