Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
khylkema  
#1 Posted : Wednesday, May 6, 2009 9:02:23 AM(UTC)
khylkema

Rank: Member

Groups: Registered
Joined: 5/6/2009(UTC)
Posts: 1

My disherwasher stopped working. the control panel has no lights and nothing works. I verified there is power to the unit. I replaced the latch and switch assembly. That did not solve the problem. any ideas?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, May 6, 2009 12:14:39 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Remove the toe panel and check the power cord connection to the dishwasher.

Here are the breakdown diagrams and Replacement parts for MAYTAG MDB5600AWB | AppliancePartsPros.com

Gene.
buffaloC  
#3 Posted : Wednesday, May 6, 2009 7:55:09 PM(UTC)
buffaloC

Rank: Member

Groups: Registered
Joined: 5/6/2009(UTC)
Posts: 2

I had a similar problem with my Maytag - No lights on the control panel; nothing worked. First, I checked that power to the door latch was OK. Then I thought the problem was the door latch switches, but it wasn't. The problem was that one of the connectors on the control circuit board had become loose. The solder connection was broken. This connector carried power to the circuit board from the door latch. I re-soldered the connector to the board (make sure the power is OFF first) and that solved the problem. Check the connectors on the circuit board and make sure the contact is good.
Users browsing this topic
Guest (2)
Similar Topics
Is 2 Ohms a big difference? (broken dishwasher- old coil vs. new coil) (Dishwasher Repair)
by latinojuan 9/6/2017 7:22:29 AM(UTC)
Broken Dishwasher - Again (Dishwasher Repair)
by mattsse 9/9/2012 12:16:32 PM(UTC)
Broken dishwasher lock (Dishwasher Repair)
by mrfixit 10/31/2007 5:27:29 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.