washer will not stop flowing into tub - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

washer will not stop flowing into tub Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LAT 9406	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

darrell38		#1 Posted : Wednesday, December 5, 2007 10:32:26 AM(UTC)
Rank: Member Groups: Registered Joined: 12/5/2007(UTC) Posts: 2		My Maytag washer will not stop flowing washer into the tub. It will not spin or rinse, when placed on the setting for each.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Wednesday, December 5, 2007 2:43:07 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The first thing I would check is the connection of the air tube to the water level switch (#13 on the control panel break down diagram). If it got loosen, drain all water out before reconnecting. If there is nothing wrong then the water level switch is bad. - The part number for the water level switch AP250430 - Here are the break down diagrams for the Maytag washer Model LAT9406AAE Gene.


User Profile View All Posts by User View Thanks

darrell38		#3 Posted : Wednesday, December 5, 2007 7:52:09 PM(UTC)
Rank: Member Groups: Registered Joined: 12/5/2007(UTC) Posts: 2		The washer will only fill up, it will not work in spin or rinse cycle. The water level switch is working. I put it in mini load and it fills to the proper level and shuts off. It will not continue the cycle and wash the clothes. i am thinking the timer is bad. It has not moved from the position that I placed it in earlier today.


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Thursday, December 6, 2007 9:52:10 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		In such situation I would check the lid switch first. You can find complete instructions in the service manual (page 3-14). Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close