Rank: Member
Groups: Registered
Joined: 5/1/2009(UTC) Posts: 1
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC) Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
You will need a meter to check things.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/1/2008(UTC) Posts: 2,429
|
Originally Posted by: Philibi4 Dryer will not heat The first thing I would do is flip the dryer breaker off and on a few times, to be sure that the breaker is not partially tripped. Just because the dryer runs dos not mean that you have all the power. After that you would have to take the back off of the dryer, and check the element, and the thermal fuse, which is located on the heater housing up on the left side. Usually it is one or the other. Tom www.applianceeducator.com:cool:
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close