GE Profile - how do you take the front off? - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

GE Profile - how do you take the front off? Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: DPXH46EA2WW	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

davinn		#1 Posted : Tuesday, April 28, 2009 4:52:30 PM(UTC)
Rank: Member Groups: Registered Joined: 4/28/2009(UTC) Posts: 1		This model of dryer has a lousy lint trap and lint often gets through the trap. I have used a vacuum cleaner attachment to get as far as I can see, but I want to clean what's beyond that to the pipe in the back. To do this, I assume you remove the front of the dryer, but I don't see how this is done. Can you please let me know how to thoroughly clean the path? Thanks.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Wednesday, April 29, 2009 5:29:42 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		On the GE models on the inside of the door frame there are usually two screws at the top that secure the top of the dryer. If you take out the screws the top will come off. This will expose the two screws that hold the front. Take them off, unhook the door safety swtich being careful to note how the wires go and the front will lift off. Good luck.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close