Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
mameis  
#1 Posted : Sunday, September 25, 2011 8:07:18 AM(UTC)
mameis

Rank: Member

Groups: Registered
Joined: 9/25/2011(UTC)
Posts: 1

I have a Kenmore Elite undercounter dishwasher and while trying to manually open the soap dispenser to see if it had soap, the little latch for the door popped out. Trying to re-insert the post into the hole - the latch will not stay in place and the springy door pulls it back out. Can this be fixed or do I need a new dispenser??
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Jim51  
#2 Posted : Wednesday, August 14, 2013 8:05:49 AM(UTC)
Jim51

Rank: Member

Groups: Registered
Joined: 8/14/2013(UTC)
Posts: 2

The post that pops out has an actuator arm attached to the end that has fallen off and will probably show up inside the door. You need a #15 Torx screw driver to remove 6 screws holding the front panel on. Recover the actuator arm and press it back on the shaft.
Jim51 attached the following image(s):
image.jpg
Guest  
#3 Posted : Saturday, December 11, 2021 5:46:28 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
thanks so much. it really helped us!!!!
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.