Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
jm605  
#1 Posted : Thursday, November 29, 2007 6:45:55 PM(UTC)
jm605

Rank: Member

Groups: Registered
Joined: 11/29/2007(UTC)
Posts: 1

My oven gets either too hot or not hot enough. I don't know if its the sensor or the control panel but there seems to be some type of electrical problem. It preheats to the temperature and then either cools down or heats up too high so baking anything either takes hours or minutes. Any help at all would be appreciated. Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Thursday, November 29, 2007 7:00:19 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Most likely the problem with your oven is a bad control board but if it cools down after preheated, the bake burner could be bad too.

- The part number for the control board (black) AP3841165

- The part number for the control board (white) AP3841218

- The part number for the bake burner AP3598752


- Here are the break down diagrams for the Whirlpool range Model SF377PEGB5

Gene.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.