Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
screen filter on cold water inlet hose
Options
Go to last post Go to first unread
Model: A9200 Brand: Maytag Age: More than 10 years
Previous Topic Next Topic
rts3wshpel  
#1 Posted : Wednesday, November 28, 2007 12:04:34 PM(UTC)
Quote
rts3wshpel

Rank: Member

Groups: Registered
Joined: 11/28/2007(UTC)
Posts: 2
water comes in very slow from cold water hose. I remove hose from
washer and clean screen filter. I replace hose and water comes in good
for a awhile. Then, it slows down again. What should I do and how do
I do it?

Robert T. Smith
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
abbie  
#2 Posted : Wednesday, November 28, 2007 12:18:28 PM(UTC)
Quote
abbie

Rank: Advanced Member

Groups: Senior Expert
Joined: 11/15/2007(UTC)
Posts: 189
you may have more screens ,check to see if there screens in the hose near the taps an at the washer. Then with the hose off, check the screen in the mixing valve on the washer if dirty clean and replace. don,t remove this screen.
Back to top
rts3wshpel  
#3 Posted : Saturday, December 1, 2007 11:42:34 AM(UTC)
Quote
rts3wshpel

Rank: Member

Groups: Registered
Joined: 11/28/2007(UTC)
Posts: 2
I haven't received any info on how
to fix my problem that I posted or if you
did answer, I don't know how to find it.
Back to top
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET