Ge Error Code F2 Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: JB710SOH355	Brand: GE	Age: 1 - 5 years
Previous Topic Next Topic

SHADETREE101		#1 Posted : Monday, April 13, 2009 1:44:23 PM(UTC)
Rank: Member Groups: Registered Joined: 4/13/2009(UTC) Posts: 4		I Get A F2 Error Sometimes Time When We Bake. How Do I Find Out If Its The Sensor Or Control Board? Sometimes It Starts Beeping 20 Min. After We Use It And The Oven Is Off.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

applianceman		#2 Posted : Monday, April 13, 2009 2:09:34 PM(UTC)
Rank: Member Groups: Registered Joined: 3/28/2009(UTC) Posts: 1,648		F2 indicates that temperature inside the oven has gotten to high. As you say it can be the sensor or the board. The sensor should read around 1000 ohms at room temperature if not it is bad. If it checks ok replace the board. Fault Code Clearing And Repair Guide
User Profile View All Posts by User View Thanks

SHADETREE101		#3 Posted : Monday, April 13, 2009 2:17:28 PM(UTC)
Rank: Member Groups: Registered Joined: 4/13/2009(UTC) Posts: 4		Where Can I Find A Wiring Diagram That Shows The Sensor?
User Profile View All Posts by User View Thanks

SHADETREE101		#4 Posted : Monday, April 13, 2009 4:20:10 PM(UTC)
Rank: Member Groups: Registered Joined: 4/13/2009(UTC) Posts: 4		which wires go to the sensor?
User Profile View All Posts by User View Thanks

applianceman		#5 Posted : Monday, April 13, 2009 5:02:49 PM(UTC)
Rank: Member Groups: Registered Joined: 3/28/2009(UTC) Posts: 1,648		Pull the range out and remove the back cover. Look where the broil unit comes out the back of the range. Between the two terminals for the broil unit are the sensor wires. You will need to disconnect them before testing ohms. Note you may have to cut them. Be sure to disconnect power from range before doing so.
User Profile View All Posts by User View Thanks

SHADETREE101		#6 Posted : Monday, April 13, 2009 5:15:52 PM(UTC)
Rank: Member Groups: Registered Joined: 4/13/2009(UTC) Posts: 4		i have 1109 ohms. does this mean that the control board is bad?
User Profile View All Posts by User View Thanks

applianceman		#7 Posted : Monday, April 13, 2009 6:02:55 PM(UTC)
Rank: Member Groups: Registered Joined: 3/28/2009(UTC) Posts: 1,648		[FONT='Times New Roman']Yes, replace the control board. [/FONT]
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)

Similar Topics

GE Error Code F2 (Oven Repair (including Ranges and Cooktops)) by jasonroach 5/20/2012 3:53:45 PM(UTC)

Sear Radiant free-standing range error code F2 (Oven Repair (including Ranges and Cooktops)) by gregoz 3/28/2011 2:21:38 PM(UTC)

Kenmore Range error code F2-E0 (Oven Repair (including Ranges and Cooktops)) by mtfurtney 1/27/2008 9:13:42 AM(UTC)