Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Testing De-frost controls
Options
Go to last post Go to first unread
Model: GE GSS22JEMD Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
bilbo  
#1 Posted : Thursday, April 9, 2009 11:02:57 AM(UTC)
bilbo

Rank: Member

Groups: Registered
Joined: 11/3/2008(UTC)
Posts: 4
OK guys,per your advice from a previous post of mine I jumpered the mother board between line and def and the defrost heater got hot immediately. So I am going to replace the motherboard. While at it I am going to go ahead and replace the def heater as the present one looks a little ragged and from reading of the frequency of failure.I think I might as well also replace the thermostat while in there. (all parts purchased from this site of course). Is there anything else I should do in your opinion?.....Thanks for the help.
GE GSS22JEMD

PS....The ice maker makes ice good but when using the dispenser from the door the little flapper spring is to tight and wont allow the ice to fall....any suggestions here?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
woodchuckie  
#2 Posted : Thursday, April 9, 2009 11:50:13 AM(UTC)
woodchuckie

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/10/2009(UTC)
Posts: 1,363
The door is controlled by a solenoid which may be sticking or the hinge or linkage may be defective.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Testing De-frost controls (Refrigerator & Freezer Repair)
by bilbo 2/26/2009 10:48:24 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET