Rank: Member
Groups: Registered
Joined: 9/4/2011(UTC) Posts: 2
|
My Bosch oven does not heat up. The stove top and the broiler are fine. I suspect the igniter. I have the part, but don't know how to access the wires to install it. I had looked around the web to find general instructions on installing an igniter, and it seemed easy.
I took off the bottom of the oven to access the igniter, but the wires go behind the frame so I cannot access it. I have included a pic. Do I have to go through the back panel to access the igniter wires. Or, more generally, how do I access the igniter wires.
Thanks for the help!
[IMG]http://www.freeimagehosting.net/5d2c8[/IMG]
There is no way I can see to remove the aluminum frame at the bottom in the pic.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/4/2011(UTC) Posts: 2
|
I found it. For those that may need to know, the wires are accessed from the back of the stove. You just need to remove/loosen the back plate.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close