Rank: Member
Groups: Registered
Joined: 9/2/2011(UTC) Posts: 2
|
PART #AP3796835 - Blue half of Valve has two small terminals. Red half ofvalve has two larger terminals. Which wires connect to which terminals? Apigtail wire asmbly contains a red wire and a doubled-blue pair. Pigtailconnects to Red half of valve, but which way? Red wire toward middle of valve?Or red to outer terminal? Two separate wires (one white, one blue) connect toBlue half of valve. Does White wire connect to inner or outer terminal? (be right back)
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC) Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
They are not polarity sensitive.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/2/2011(UTC) Posts: 2
|
Originally Posted by: richappy They are not polarity sensitive. So it doesn't matter, as long as I connect the pigtail asm to the Red side, and the separate blue and white wires to the Blue side. Correct ? Thanks, mtt
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close