Rank: Member
Groups: Registered
Joined: 4/3/2009(UTC)
Posts: 2
|
Came home to blinking clocks (power failure) 2 days ago, dishes not clean. Re-ran, still not clean and undesolved soap. This time re-ran, but listened to operation. Started as usual with normal filling noise, pause, then no sound. Opened door to hot water in bottom of dishwasher. Tried other cycle options, including top only wash, still nothing. Cancled cycle and water then pumped out. Any thoughts? Thanks for the help.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 12/2/2007(UTC)
Posts: 769
|
Sounds like the pump isn't operating. The best thing to try is remove the kick plate and find the harness and connector to the pump motor. Use a multimeter to verify 120vac when you start a wash cycle. If you have it, then the motor is bad. If you don't, then the control board is a likely area to continue your search. You may must have a loose connector and can fix it quickly.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/3/2009(UTC)
Posts: 2
|
Thank you so much for your response! I will have a look at the motor per your instructions and let you know what I find...
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 12/2/2007(UTC)
Posts: 769
|
Sounds good. We will be here.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
