Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
csky  
#1 Posted : Monday, March 30, 2009 11:25:45 AM(UTC)
csky

Rank: Member

Groups: Registered
Joined: 3/30/2009(UTC)
Posts: 3

convection fan doesnt come with convection cooking,

I knowticed that the convec. fan was not working when on convec. bake . The convec. element works .

We just purchased this on craigslist. everything checkout ok before moving range to our place.

The manual says that the fan stops when the door is opened ,so i held the button in ,and noticed the convect. element working and the fan was,nt .

Any ideas out there .
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Monday, March 30, 2009 2:09:53 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Check the motor itself for continuity. Check all wires and the door switch. Also there can be some delay for the motor to start.

Gene.
P.S. The model number you posted does not come up. Is it an American model?
csky  
#3 Posted : Monday, March 30, 2009 2:20:14 PM(UTC)
csky

Rank: Member

Groups: Registered
Joined: 3/30/2009(UTC)
Posts: 3

Howdy Gene ,thanks for your response, Ive looked the range over to verify model # and origin of build . Cant find origin of build ,but the manual gives U. S. contact info. The only luck i,ve had with using the model # is using the 1st 5 characters . Thanks again
Gene  
#4 Posted : Monday, March 30, 2009 2:24:33 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Look for the model number on the range frame behind the bottom drawer or on the oven door frame.

Gene.
csky  
#5 Posted : Monday, March 30, 2009 3:17:48 PM(UTC)
csky

Rank: Member

Groups: Registered
Joined: 3/30/2009(UTC)
Posts: 3

Thanks Gene , I,ll give it a whirl ,and let ya know the score.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.