Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whirlpool oven wont heat
Options
Go to last post Go to first unread
Model: RBS305PD89 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
pcrellin  
#1 Posted : Wednesday, March 25, 2009 8:08:25 AM(UTC)
pcrellin

Rank: Member

Groups: Registered
Joined: 3/25/2009(UTC)
Posts: 7
Last Night we lost power. Today the wall oven had a code of E1 F1. I turned off the breaker for 30 seconds and same thing.
The stove top works, all lights on the display work. The oven does not get hot.
The oven is 9 years old. Is this the control panel? Or maybe just the transformer as I read in a thread? Are parts still availabel?
Whirlpool RBS305PD89
Thanks,
Pat
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
pcrellin  
#2 Posted : Wednesday, March 25, 2009 8:15:20 AM(UTC)
pcrellin

Rank: Member

Groups: Registered
Joined: 3/25/2009(UTC)
Posts: 7
This is propane. When we 1st saw the error code E1 F1, we tried the stove top and it would not light. After I turned off power for 30 seconds the stove top lights. Could this be the pilot light for the oven? I don't smell gas when we turn on the oven.
Pat
Back to top
pcrellin  
#3 Posted : Wednesday, March 25, 2009 8:17:06 AM(UTC)
pcrellin

Rank: Member

Groups: Registered
Joined: 3/25/2009(UTC)
Posts: 7
OK, I see the oven is electric. go ahead and laugh.
Back to top
pcrellin  
#4 Posted : Wednesday, March 25, 2009 6:25:41 PM(UTC)
pcrellin

Rank: Member

Groups: Registered
Joined: 3/25/2009(UTC)
Posts: 7
bump bump bump
Back to top
denman  
#5 Posted : Thursday, March 26, 2009 1:34:29 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Could not find info on the listed model number PD89, tech sheet is for a PDB9.
Hopefully this is correct.

Here are your parts
Replacement parts for WHIRLPOOL RBS305PDB9 | AppliancePartsPros.com

Here is a tech sheet
https://www.servicematters.com/d...0Sheet%20-%204451884.pdf

Looks like the code is an error on the control board.
Code seems to indicate it is a check sum error re: the integrated circuit is shot.
I would remove power from the unit overnight, some boards take quite a while to reset. A long shot but still worth a shot.
It is interesting that the board comes with an electronic filter (line conditioner), sort of indicates there have been a problems in this area (voltage spikes damaging the chip).
THIS FORUM IS DEAD!!!!!!!
Back to top
pcrellin  
#6 Posted : Thursday, March 26, 2009 5:29:00 AM(UTC)
pcrellin

Rank: Member

Groups: Registered
Joined: 3/25/2009(UTC)
Posts: 7
Great forum, thanks for the help.

I'll leave the power off for a day & see if that works.
I see the control panel takes 5-6 days to ship. Is that all I need? Can you direct me to insructions to r&r the control panel. I don't see any screws. Does everything pry off? Do I need to pull the oven out to get to the control board?
Back to top
ladymp  
#7 Posted : Thursday, March 26, 2009 1:31:26 PM(UTC)
ladymp

Rank: Member

Groups: Registered
Joined: 3/26/2009(UTC)
Posts: 3
I Have Whirlpool Model Gw395leps00 Control Panel Keeps Blowing Out And Replaced After Less Than One Year Old The First Time. Whirlpool Claims No Problem
Back to top
pcrellin  
#8 Posted : Friday, March 27, 2009 4:42:20 AM(UTC)
pcrellin

Rank: Member

Groups: Registered
Joined: 3/25/2009(UTC)
Posts: 7
Little help please.
Oven did not reset overnight. I'm trying to decide whether to call a repairman. Would like to do this myself.
Do I only need the control panel? Can anyone direct me to instruction to r&r the panel.
Back to top
ladymp  
#9 Posted : Friday, March 27, 2009 11:17:00 AM(UTC)
ladymp

Rank: Member

Groups: Registered
Joined: 3/26/2009(UTC)
Posts: 3
researching whirlpool control panel on ovens; there has been a recall on their ovens in 2004 due to malfunctioning control panels. there are underlying problems causing the probems with current model a hard to reach fuse and ignition module. i have replaced control panel twice and it has blown for the third time.
Back to top
pcrellin  
#10 Posted : Friday, March 27, 2009 1:50:41 PM(UTC)
pcrellin

Rank: Member

Groups: Registered
Joined: 3/25/2009(UTC)
Posts: 7
3 control boards? Sorry to hear that. I guess I'm going to call a repairman. Not getting much help on this forum.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
electric whirlpool oven wont heat (Oven Repair (including Ranges and Cooktops))
by wildgopher 2/27/2012 9:42:56 AM(UTC)
Whirlpool Oven Wont Heat (Oven Repair (including Ranges and Cooktops))
by Francish 11/30/2011 7:50:17 PM(UTC)
whirlpool oven wont heat up (Oven Repair (including Ranges and Cooktops))
by tim hinson 5/11/2011 3:49:42 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET