Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Brolier Element
Options
Go to last post Go to first unread
Model: 91140161690 Brand: Kenmore Age: 5 - 10 years
Previous Topic Next Topic
theodore  
#1 Posted : Tuesday, March 24, 2009 10:13:40 AM(UTC)
theodore

Rank: Member

Groups: Registered
Joined: 3/24/2009(UTC)
Posts: 1
The top element in my Kenmore built-in oven went out. The bottom works fine. I notice there is two screws in the back. So do i remove the screws and pull the element out and replace it with the new one or what steps should i take to replace it.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
woodchuckie  
#2 Posted : Tuesday, March 24, 2009 10:30:29 AM(UTC)
woodchuckie

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/10/2009(UTC)
Posts: 1,363
That's about it. After you take the screws out you pull the wires out just a little and unplug them. Be careful not to let them fall through the opening. Might have trouble getting it back out. Plug the new one in and screw it down.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
oven and brolier elements wont heat (Oven Repair (including Ranges and Cooktops))
by lizardqueen 1/17/2009 9:36:07 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET