Rank: Member
Groups: Registered
Joined: 7/29/2011(UTC)
Posts: 1
|
what part do i have to buy when theres a heater temperature control problem in my gas dryer?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: isaiah  what part do i have to buy when theres a heater temperature control problem in my gas dryer? Isaiah, You may not need a part at all. The "t5" code is actually a "TS" code, indicating the "thermistor is shorted". The thermistor is located on the front of the blower housing, in the inside of the dryer. It should have a resistance reading of 10,000 ohms at room temperature, on a multimeter. Part number: AP4045224
If you have a clogged dryer exhaust vent, dirty lint filter, or the machine is overloaded, it can cause the TS code to display. You'd be best off to check that first. Your technical data sheet, should be taped to the back of the dryer, and you can use it to reset the control and run the other various tests. Good Luck, :) :) :)
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
