Rinse cycle only lets in hot water - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Rinse cycle only lets in hot water Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 110.92480200	Brand: Kenmore	Age: More than 10 years
Previous Topic Next Topic

rvkmk1		#1 Posted : Tuesday, July 26, 2011 11:29:49 AM(UTC)
Rank: Member Groups: Registered Joined: 7/26/2011(UTC) Posts: 1		Washer does everything right but now is only letting hot water in rinse cycle instead of cold water. (All rinse cycles should only be cold according to the diagrams and dials on the control board on the machine.)


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Jeff / APP Team		#2 Posted : Tuesday, July 26, 2011 11:42:32 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 2/14/2011(UTC) Posts: 816		Hello rvkmk1. Check and make sure the water hoses are not reversed going to the water valve. If they are correct, then the temperature switch is bad. The switch has been discontinued for this model. Hope this helps. Part number: AP3096268


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close