Rank: Member
Groups: Registered
Joined: 7/26/2011(UTC) Posts: 1
|
I have a GE Washer that is about 4 years old. Last week, I had to replace my timer knob as the bottom became completely stripped. After I replaced it, I discovered that the washer will now no longer spin or agitate. It will fill and drain fine.
Also, when is now in operation, a strange smell starts to come from the inside of the washer. It smells like burnt plastic or wiring, but I can't seem to find the source. Ideas?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
Take off the front and see if there is a problem with the belt. Also see if the transmission will turn. If it will not, then the problem is with the transmission unit and I would recommend replacement.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close