Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Touch pad for Ice & water dispenser not working
Options
Go to last post Go to first unread
Model: GSS23LSTCSS Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
Gregory Allan Hunt  
#1 Posted : Saturday, March 21, 2009 6:49:20 AM(UTC)
Gregory Allan Hunt

Rank: Member

Groups: Registered
Joined: 3/9/2009(UTC)
Posts: 4
Good Day to All,

The touch pad ( interface dispenser asm.) is not dispensing the Icer or water. The unit lights up but when the pad is pressed the light for the selected function goes out. Can anyone help?

Gregory A. Hunt
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
kayakcrzy  
#2 Posted : Saturday, March 21, 2009 7:39:12 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
Greg, usually when I see that problem, it is not the dispenser interface assembly, it is usually the mother board, behind the refrigerator. If you pull the refrigerator out, on the back you will see a panel, which is held on by three screws. Behind it is the motherboard. Part # WR55X10552. Tom
Back to top
Gregory Allan Hunt  
#3 Posted : Saturday, March 21, 2009 5:40:57 PM(UTC)
Gregory Allan Hunt

Rank: Member

Groups: Registered
Joined: 3/9/2009(UTC)
Posts: 4
Tom, Thanks very much for the info. I will replace the mother board as I recently purchased one from appliance parts pros.

Greg.
Back to top
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET