Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
hider  
#1 Posted : Monday, July 18, 2011 9:45:19 AM(UTC)
hider

Rank: Member

Groups: Registered
Joined: 7/18/2011(UTC)
Posts: 1

Washer Starts /fills With Water; However, Same Shuts Off After Approximately 2 Min. And Displays Err Pause. There Is No Numeric Error Code, Just Err. It Will Drain And Spin Sometimes. If I Play With The Door/and Unplug The Machine I Can Get It To Work For A Few Minutes
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Tuesday, July 19, 2011 6:01:04 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Inside the lower service panel are some tech notes that will show you how to put it into a diagnostic mode and generate error codes. On your model these will be generated as flashing lights.

It sounds like the door lock assembly is bad, that is where I would concentrate. It can also be the wiring between the door lock assembly and the control unit, and if all that checks out the control unit is suspect.
Users browsing this topic
Guest (3)
Similar Topics
Dishwasher starts then stops (Dishwasher Repair)
by rkoerner 11/29/2018 11:47:14 AM(UTC)
Washer starts then stops (Washer Repair)
by JWCT 10/10/2013 8:18:51 AM(UTC)
DIsh washer starts then stops (Dishwasher Repair)
by mbojar69 10/30/2012 6:52:01 AM(UTC)
Kitchenaid washer starts then stops then restarts (Washer Repair)
by Merv 10/17/2009 8:08:48 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.