Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
bigguy  
#1 Posted : Thursday, November 15, 2007 7:18:45 AM(UTC)
bigguy

Rank: Member

Groups: Registered
Joined: 11/15/2007(UTC)
Posts: 1

Recently used self-clean option on top oven and after cycle was complete I cannot get heat from either element. Controls, fan and bottom oven work fine. The elements do not appear to be damaged. Based on another thread (posted on 11/1 by choldca and responded to by Gene), it appears that I will need to pull out the oven and replace a thermal fuse/thermal cut off.

Would it be possible to get instruction and part information to replace? Whirlpool Model Series #RBD305.

Please note that I already replaced the microcomputer as well because there was damage to it.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
lavonna  
#2 Posted : Thursday, September 18, 2008 5:02:12 AM(UTC)
lavonna

Rank: Member

Groups: Registered
Joined: 9/18/2008(UTC)
Posts: 3

Originally Posted by: bigguy Go to Quoted Post
Recently used self-clean option on top oven and after cycle was complete I cannot get heat from either element. Controls, fan and bottom oven work fine. The elements do not appear to be damaged. Based on another thread (posted on 11/1 by choldca and responded to by Gene), it appears that I will need to pull out the oven and replace a thermal fuse/thermal cut off.

Would it be possible to get instruction and part information to replace? Whirlpool Model Series #RBD305.

Please note that I already replaced the microcomputer as well because there was damage to it.

I have the exact model and same problem after running self-cleaning mode. Neither bake nor broil elements will begin to heat. Would you please share any response or how you resolved your issue if you have? Thank you!
libertyappl  
#3 Posted : Thursday, September 18, 2008 5:32:56 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

Can you both post the entire model numbers off the oven themselves, so to make sure it's the same part you need. There are about 20+ RBD305 models.
Nat
lavonna  
#4 Posted : Thursday, September 18, 2008 6:45:52 AM(UTC)
lavonna

Rank: Member

Groups: Registered
Joined: 9/18/2008(UTC)
Posts: 3

My model is rbs305pdb16, I think that just means mine is a single not double oven but I know that would affect the parts. I have the same problem after self-cleaning - neither bake nor broil work but the panel works fine and the fan runs, appears to be heating but there's no heat at all.
libertyappl  
#5 Posted : Thursday, September 18, 2008 7:39:00 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

lavonna,
The thermostat/TOD for your oven is part # 4451442 or AP# AP3885687
Nat
lavonna  
#6 Posted : Thursday, September 18, 2008 7:53:08 AM(UTC)
lavonna

Rank: Member

Groups: Registered
Joined: 9/18/2008(UTC)
Posts: 3

Awesome, thank you so much! I tried to find a thermal fuse but could only find the thermostat on my model but I wasn't even sure if that would solve the problem. Thank you again!
libertyappl  
#7 Posted : Thursday, September 18, 2008 8:03:06 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

Let us know if we can help with anything else.
Nat
Users browsing this topic
Guest (6)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.