Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
beejosh  
#1 Posted : Saturday, July 2, 2011 2:11:35 PM(UTC)
beejosh

Rank: Member

Groups: Registered
Joined: 7/2/2011(UTC)
Posts: 1

Have a 16 yr. old Amana LW8203W2 washer that started leaking towards rear of machine. After running it with top removed for visibility, it appears that water pools up in the little channels on the rear of the plastic tub cover and during agitation they overflow and water runs down exterior on tub rear. Have had seal off and back on again - pretty sure nothing is leaking past it How are those channels supposed to work?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Monday, July 4, 2011 11:44:26 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

About the only way we can diagnose a leak is to operate the machine with the front off and see where the leak is coming from. It will either be the center seal or the hose. In rare occasions with a machine as hold as yours it can be a cracked tub, so check that too.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.