help installing overload relay - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

help installing overload relay Options Email this topic Watch this topic Print this topic » Normal Threaded
	Brand: Amana	Age: More than 10 years
Previous Topic Next Topic

Tony Norris		#1 Posted : Wednesday, June 29, 2011 5:31:05 PM(UTC)
Rank: Member Groups: Registered Joined: 6/29/2011(UTC) Posts: 1		have refrig TLI22KW, P7803230WW it stopped cooling, found overload burnt, ordered #1952715, run capacitor and overload & relay assembly. Installed overload only - plugged in and hear pops(like a loud relay opening or closing a few seconds apart. attempted to then change relay(below it) but old one has 3 wires(2 on one connector) and the new one only has one avail lug instead of 2. what were pops? what am i not seeing?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

richappy		#2 Posted : Thursday, June 30, 2011 1:50:48 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		You will need a meter to install parts. The correct part # is shown on this site, but not in stock, might not be available, just call this site. The pop you heard might be the compressor winding blowing open if you connected things wrong. Should check windings with a meter before ordering parts.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close