Problem with kitchen aid refrigerator kbfa25erss01. - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Problem with kitchen aid refrigerator kbfa25erss01. Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KBFA25ERSS01	Brand: Kitchen Aid	Age: 1 - 5 years
Previous Topic Next Topic

AMINAZIZ		#1 Posted : Tuesday, June 21, 2011 9:55:44 AM(UTC)
Rank: Member Groups: Registered Joined: 6/21/2011(UTC) Posts: 1		Problem with kitchen aid refrigerator kbfa25erss01. Not enough cooling in refrigerator but freezer side heavy iced up. Checked defrost thermostat and element heater both ok. Replaced control board (Manufacturer Number 12782036SP) and when powered up the unit it showed PE0 000 THEN TRIED TO PROGRAM THE REFRIGERATOR CODE BUT IT WOULD NOT GO INTO THE PROGRAMING MODE. FOLLOWED THE INSTRUCTIONS TO PROGRAM BUT NOTHING HAPPENS PE0 000 JUST STAYS ON AND IT DOES NOT GO INTO THE PROGRAM MODE. COULD IT BE A BAD CONTROL BOARD? WOULD APPRECIATE ALL THE SUGGESTIONS AND HELP. THANKS.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Joe / APP Team		#2 Posted : Tuesday, June 21, 2011 11:50:06 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 7/14/2010(UTC) Posts: 5,222 Was thanked: 1 time(s) in 1 post(s)		Originally Posted by: AMINAZIZ Problem with kitchen aid refrigerator kbfa25erss01. Not enough cooling in refrigerator but freezer side heavy iced up. Checked defrost thermostat and element heater both ok. Replaced control board (Manufacturer Number 12782036SP) and when powered up the unit it showed PE0 000 THEN TRIED TO PROGRAM THE REFRIGERATOR CODE BUT IT WOULD NOT GO INTO THE PROGRAMING MODE. FOLLOWED THE INSTRUCTIONS TO PROGRAM BUT NOTHING HAPPENS PE0 000 JUST STAYS ON AND IT DOES NOT GO INTO THE PROGRAM MODE. COULD IT BE A BAD CONTROL BOARD? WOULD APPRECIATE ALL THE SUGGESTIONS AND HELP. THANKS. You're on the right track, you took care of the most likely problems by replacing the control board. The trick to the programming mode, you have to be into it in less than 3 seconds, and you need to unplug the power cord between attempts. (you can't read and push buttons at the same time,essentially). As long as you're sure you have the wiring properly connected to the connections on the new control board, you should be up and running soon. :) :) :)


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close