Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Replacing Oven Element
Options
Go to last post Go to first unread
Model: CE3520SRA Brand: Crosley Age: More than 10 years
Previous Topic Next Topic
dlszds  
#1 Posted : Tuesday, March 3, 2009 7:21:33 AM(UTC)
dlszds

Rank: Member

Groups: Registered
Joined: 3/3/2009(UTC)
Posts: 1
Is it a simple matter of unscrewing the old bottom element from the back wall of the oven, pulling it out and inserting the new element.....or does it require a service tech to replace the element?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
TechnicianBrian  
#2 Posted : Tuesday, March 3, 2009 4:02:27 PM(UTC)
TechnicianBrian

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/2/2007(UTC)
Posts: 769
Just remove the screws and slowly pull the element out until you can get to the connectors. If one of the wires falls off, then you will need to remove the rear panel to get it put back together so pull gently.
Back to top
Users browsing this topic
Similar Topics
Replacing oven element (Oven Repair (including Ranges and Cooktops))
by Susan1 10/26/2010 10:59:05 AM(UTC)
question on replacing oven element (Oven Repair (including Ranges and Cooktops))
by wolfsmane 10/2/2009 8:39:12 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET