Rank: Member
Groups: Registered
Joined: 6/13/2011(UTC)
Posts: 1
|
My Ice maker is putting out ice but at a slow pace but it is spilling water out of the front corner of the ice makers front tray like a 1/4 inch frozen stream. Do I need a hole ice maker or is this an adjustment issue????
Thanks, Jim
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: jimmydye@ca.rr.com  My Ice maker is putting out ice but at a slow pace but it is spilling water out of the front corner of the ice makers front tray like a 1/4 inch frozen stream. Do I need a hole ice maker or is this an adjustment issue????
Thanks, Jim Jim, You can try and adjust the water level, it will work for a while, but you've most likely have a "sticky" water valve and it's allowing the icemaker to slowly overfill, and causing the icicle. With the white plastic cover removed from the front of the assembly, you should see a white plastic screw slightly protruding from the side of the mechanism. you can adjust the level lower by turning the screw in a clockwise direction 1 or 2 revolutions (3/4 to 1 turn would probably be sufficient). I take for granted you've already checked for good water supply to the fridge and a clean water filter( if applies). Good Luck, :) :) :)
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
